22.2M Aquaculture Support Vessel – SOLD

Price: $350,000 + GST

The vessel is currently configured as an aquaculture support vessel with large deck-load capacity and handling system for feeding and extended towing operations at-sea. The vessel is in AMSA 3B for 8 crew (next Shaft Survey in August 2025).

The aft deck area is 8m in length measured from the rear of the the port and stbd fish room combings. The vessel is manoeuvrable and economical to operate and would suit conversion back to fish trawl or danish seine fisheries. Stability Book and Condition Survey Report available for review by serious buyers.

Please contact Christian Pyke on 0428 233 200 with all enquiries.


Vessel Information

Material Steel (Hull and Decking) / Aluminium Superstructure
Year Built Circa. 1980
Location Built
Rebuild (if applicable)

The vessel had a major refit by Adelaide Ship Constructions which included lengthening of the vessel in 2000.

Class / Survey AMSA 3B (8 Crew) / Next Shaft Survey due September 2025
Gross Tonnage 58.4 Tonnes
Displacement Tonnes
Dimensions 21.24m Length x 5.51m Beam x 2.90m Draft


Main Engine Caterpillar Model - 3406B
Horse Power 450 HP @ 1800 RPM
Engine Hours 6,315 hrs
Fuel Capacity 7 x Tanks (including 2 x wing tanks for daily service)
Freshwater Capacity 2 x Tanks (fwd) with high capacity desalinator
Gearbox Twin Disc MG521
Reduction Gear Unknown
Bollard Pull
Aux Engine/Generator 1 x Caterpillar 3056 (272 Hrs) with 110 KVA Mecc Alte Genset / 1 x Perkins 6cyl Sabre (4,240 Hrs) with 110 KVA Stamford Genset
Propulsion Single-screw
Steering Gear Power Hydraulic
Steering stations (number of) 2



JRC JMA-3254


Furuno FCV 2951


Multiple HF, VHF and Private Radios / Thrane & Thrane Satellite Phone


C-Plot (with computers)


Furuno GP32 / Magnetic Compass Saura T150


Simrad AP35


Yes - Operational



Unloading Crane/Boom (if applicable)

Deck Crane - Palfinger PK 18500 (20 Tonne Load Capacity)

Deck Equipment

Twin Gypsy and Cable Winch
1 x 3 Phase hydraulic power-pack operating deck equipment and winches

Factory / Processing Plant (if applicable)
RSW Plant 2 x RSW Tanks (currently used for live feed)
Freezer Plant -18 degree holding room
Fish Hold Dimensions of port and stbd RSW tanks TBC
Cooling System 1 x Bitzer Compressor for -18 degree freezer
Accomodation 1 x 6 Berth Cabin / Galley and Mess Area fitted with galley table and small small kitchen aft of wheelhouse / Shower and Laundry (lined with fibreglass coating

Items of note:
Euromade 4-Burner electric stove and oven
Electrocool and Fisher & Paykel Fridge / freezers
Fujitsu Split System A/C Unit
Panasonic Microwave


Interested? Enquire now

  • This field is for validation purposes and should be left unchanged.